Publicité
Les langues disponibles
Les langues disponibles
Features
Top Panel
17
14
1.
Browse Knob: Rotate this knob to cycle through crates and tracks. Press it to move
forward in the software panels.
2.
Load: Press one of these buttons while a track is selected to assign it to Deck 1 or 2,
respectively, in the software.
3.
Main Gain: Adjusts the overall volume in the software.
4.
Cue Gain: Adjusts the volume for headphone cueing in the software.
5.
Level: Adjusts the pre-fader, pre-EQ audio level of the corresponding channel in the
software.
6.
High EQ: Controls the treble frequencies for the individual channels.
7.
Low EQ: Controls the bass frequencies for the individual channels.
8.
Filter: Adjusts the amount of the filter effect. Turning the knob left and right will produce a
low-pass filter and high-pass filter, respectively.
9.
Channel Volume: Adjusts the volume of the individual channels in the software.
10. Crossfader: Controls the blend between the two decks.
11. PFL/Cue: Press this button to send this channel's pre-fader signal to the Cue Channel for
monitoring. When engaged, the button will be lit. By pressing one PFL button at a time,
you will cue that channel alone (and deactivate PFL monitoring for the other channels). To
cue to multiple channels simultaneously, press the PFL buttons for those channels at the
same time.
12. Platter/Jog Wheel: This capacitive, touch-sensitive jog wheel controls the audio when
the wheel is touched and moved. You can also grab the non-touch-sensitive outer wheel
to bend the pitch of the track.
13. Pitch Fader: This controls the speed of the music. Moving towards the "+" will speed the
music up, while moving towards the "–" will slow it down.
14. Sync: Press this button to automatically match the corresponding Deck's tempo with the
opposite Deck's tempo and phase.
4
5
6
12
7
8
18
9
-
19
13
15 16
5
1
2
6
4
7
8
11
9
17
3
10
14
12
18
19
13
15 16
Publicité
