Virax Siberia Manuel D'utilisation page 20

Choosing freezer heads
The table below shows the various freezer heads supplied with the Siberia® freezer
Ref.
221026
221027
221028
221029
221031
221033
221036
221037
Indicative freezing times
Times (in minutes) are supplied for information only. They are given, for an ambient temperature of
20°C and for water at a temperature of 15°C. These values can vary.
Series / Option
Optional parts
Supplied with Siberia®
Supplied with Siberia®
Supplied with Siberia®
Supplied with Siberia®
Optional parts
Supplied with Siberia®
Optional parts
Supplied with Siberia®
Optional parts
Optional parts
Supplied with Siberia®
Supplied with Siberia®
Optional parts
Optional parts
Clamps without heads
The freezer can be used on copper and steel tubes with dimensions in inches.
Maintenance
In order to increase the lifetime of your Siberia freezer, observe the following instructions:
•
Clean the freezer heads and the refrigerating clamps on a regular basis.
•
Regularly clean the grills in order to augment the life duration of the freezer unit.
•
Do not obstruct the air vent.
For all other maintenance operations, return the unit to Virax after-sales service.
Important:
Any maintenance operation undertaken by a person external to Virax cancels the guarantee.
20
Gr. Ø Cu
II 12mm
III 14/15mm
IV 16mm
V 18mm
VII 22mm
A 28mm
D 35mm
E 42mm
Ref. Gr.
221025 I + E
221026 II + E
221027 III + E 14/15mm
221028 IV + E
221029 V + E
221030 VI + E
221031 VII + E
221032 VIII + E
221033 A
221034 B
221035 C
221036 D
221037 E
221038 F
221039 G
Ø Cu
1/2"
-
5/8"
-
7/8"
-
1.3/8"
-
Ø Cu Ø Cu
10mm 3/8"
12mm 1/2"
-
16mm 5/8"
18mm -
20mm 3/4"
22mm 7/8"
- 1"
28mm -
- 1.1/8"
32mm 1.1/4"
35mm 1.3/8"
42mm -
- -
54mm 2.1/8"
EN
Ø Fe
-
1/4"
-
3/8"
1/2"
3/4"
1"
1.1/4"
Ø Fe time
1/8" 4min
- 4min
1/4" 5min
- 6min
3/8" 8min
- 10min
1/2" 12min
- 15min
3/4" 17min
- 20min
- 22min
1" 24min
1.1/4" 56min
1.1/2" 70min
- 75min
2" 110min