Makita DUC204 Manuel D'instruction page 4

8. Do not let familiarity gained from fre-
quent use of tools allow you to become
complacent and ignore tool safety prin-
ciples. A careless action can cause severe
injury within a fraction of a second.
9. Always wear protective goggles to pro-
tect your eyes from injury when using
power tools.The goggles must comply
with ANSI Z87.1 in the USA.
It is an employer's responsibility to
enforce the use of appropriate safety
protective equipments by the tool opera-
tors and by other persons in the immedi-
ate working area.
Power tool use and care
1. Do not force the power tool. Use the cor-
rect power tool for your application. The
correct power tool will do the job better and
safer at the rate for which it was designed.
Do not use the power tool if the switch
2.
does not turn it on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
3. Disconnect the plug from the power
source and/or remove the BATTERY
pack, if detachable, from the power
tool before making any adjustments,
changing accessories, or storing power
tools. Such preventive safety measures
reduce the risk of starting the power tool
accidentally.
4. Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
5. Maintain power tools and accessories.
Check for misalignment or binding of
moving parts, breakage of parts and any
other condition that may affect the power
tool's operation. If damaged, have the
power tool repaired before use. Many
accidents are caused by poorly maintained
power tools.
Keep cutting tools sharp and clean.
6.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
7. Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to be
performed. Use of the power tool for oper-
ations different from those intended could
result in a hazardous situation.
8. Keep handles and grasping surfaces
dry, clean and free from oil and grease.
Slippery handles and grasping surfaces do
not allow for safe handling and control of the
tool in unexpected situations.
9. When using the tool, do not wear cloth
work gloves which may be entangled.
The entanglement of cloth work gloves in the
moving parts may result in personal injury.
BATTERY tool use and care
1. Recharge only with the charger specified
by the manufacturer. A charger that is
suitable for one type of BATTERY pack may
create a risk of fire when used with another
BATTERY pack.
2. Use power tools only with specifically
designated BATTERY packs. Use of any
other BATTERY packs may create a risk of
injury and fire.
3. When BATTERY pack is not in use, keep
it away from other metal objects, like
paper clips, coins, keys, nails, screws
or other small metal objects, that can
make a connection from one terminal to
another. Shorting the BATTERY terminals
together may cause burns or a fire.
4. Under abusive conditions, liquid may be
ejected from the BATTERY; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
BATTERY may cause irritation or burns.
Do not use a BATTERY pack or tool that
5.
is damaged or modified. Damaged or
modified batteries may exhibit unpredictable
behaviour resulting in fire, EXPLOSION or
risk of injury.
6. Do not expose a BATTERY pack or
tool to fire or excessive temperature.
Exposure to fire or temperature above 130
°C may cause explosion.
7. Follow all charging instructions and do
not charge the BATTERY pack or tool
outside the temperature range specified
in the instructions. Charging improperly or
at temperatures outside the specified range
may damage the BATTERY and increase
the risk of fire.
Service
Have your power tool serviced by a qual-
1.
ified repair person using only identical
replacement parts. This will ensure that
the safety of the power tool is maintained.
2. Never service damaged BATTERY packs.
Service of BATTERY packs should only be
performed by the manufacturer or autho-
rized service providers.
4 ENGLISH