Güde GBTS 400 Traduction Du Mode D'emploi D'origine page 25

Technical Data
Belt- and disc sander
Art. No
Service connection
Motor power
No-load speed
Belt speed
no load
Belt size
Sanding surface max.
Min. workpiece dimensions
Weight
Noise details
Sound pressure level L
pA
Sound power level L
WA
Measured according to EN61029;
Uncertainty K = 3 dB (A)
Wear ear protectors!
The S2 - 30 min indicates a load profile of 30 min
*
load and 30 min idle time
The numerical values given are emission levels and
not necessarily safe working levels. Although there
is a correlation between the emission levels and the
acceptable exposure levels, they cannot be reliably
used to determine whether or not any additional
safety measures are necessary. The characteristics
of the work space, other sources of noise, i.e. the
number of machines and other processes running
in the vicinity and so on, are all factors that can in-
fluence the actual exposure levels of the employees.
Moreover, the acceptable exposure levels can vary
from country to country. This information should
enable the machine's operator to carry out a better
assessment of the risks and hazards.
Read and understand the operating
instructions before using the
appliance. Familiarise with the
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties.
The operator is responsible for accidents or risks to
third parties.
Persons over 16 years of age can only work on the
appliance. An exception includes youngsters trained
in order to reach knowledge under supervision
of the trainer during occupational education.
In case of any doubts about connection and operati-
on refer please to our customer center
Specified Conditions Of Use
This equipment is exclusively intended for surface
GBTS 400
processing and deburring wood or wood-like materi-
als, as well as ferrous metals and non-ferrous metals,
55135
while taking the maximum sanding surface and safety
230 V ~ 50 Hz
regulations into consideration.
350 W
The machine may only be used in a technically
S2 - 30 min
*
perfect condition and taking into account all safety
information.
1450 min
-1
Do not use this product in any other way as stated
292 m/min
for normal use. Not observing general regulations
in force and instructions from this manual does not
100 x 910 mm
make the manufacturer liable for damages.
100 x 340 mm/
It is strictly prohibited to disassemble, modify
Ø 150 mm
and purposely remove the protective equipment on
50 x 20 mm
the unit and fit other protective equipment instead.
13 kg
Residual risks
77 dB (A)
Even when the device is used properly and all safety
90 dB (A)
regulations are complied with, there still may be
some residual risks.
• noise emissions
• dust emissions
• vibrations to hand and arms
• Danger of burns
Tool and workpiece heat up during operation.
• Risk of injury
Sharp tools and workpiece edges
Emergency procedure
Conduct a first-aid procedure adequate to the injury
and summon qualified medical attendance as quickly
as possible. Protect the injured person from further
harm and calm them down. If you seek help, state the
following pieces of information: 1. Accident site, 2.
Accident type, 3. Number of injured persons, 4. Injury
type(s)
Symbols
WARNING/CAUTION!
Warning against thrown-off items
Warning against dangerous electric
voltage
Keep distance of persons
Observe to keep out of dangerous zone
WARNING - Read the operating instruc-
tions to reduce the risk of injury.
ENGLISH
21