Güde GBSM 100 Traduction Du Mode D'emploi D'origine page 19

Technical Data
Belt sander
Art. No
Service connection
Motor power
No-load speed
Sanding surface max.
Belt size
Belt speed
no load
Weight
Noise details
Sound pressure level L
pA
Sound power level L
WA
Uncertainty K = 3 dB (A)
Wear ear protectors!
The numerical values given are emission levels and
not necessarily safe working levels. Although there
is a correlation between the emission levels and the
acceptable exposure levels, they cannot be reliably
used to determine whether or not any additional
safety measures are necessary. The characteristics
of the work space, other sources of noise, i.e. the
number of machines and other processes running
in the vicinity and so on, are all factors that can in-
fluence the actual exposure levels of the employees.
Moreover, the acceptable exposure levels can vary
from country to country. This information should
enable the machine's operator to carry out a better
assessment of the risks and hazards.
Read and understand the operating
instructions before using the
appliance. Familiarise with the
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties. The operator is responsible for accidents or
risks to third parties.
Persons over 16 years of age can only work on the
appliance. An exception includes youngsters trained
in order to reach knowledge under supervision
of the trainer during occupational education.
In case of any doubts about connection and operati-
on refer please to our customer center
Specified Conditions Of Use
This equipment is exclusively intended for surface
processing and deburring wood or wood-like materi-
als, as well as ferrous metals and non-ferrous metals,
while taking the maximum sanding surface and safety
regulations into consideration.
The machine may only be used in a technically
perfect condition and taking into account all safety
information.
Do not use this product in any other way as stated
for normal use. Not observing general regulations
GBSM 100
in force and instructions from this manual does not
make the manufacturer liable for damages.
55105
230 V ~ 50 Hz
It is strictly prohibited to disassemble, modify
and purposely remove the protective equipment on
1500 W
the unit and fit other protective equipment instead.
2840 min
-1
100 x 380 mm
Residual risks
100 x 1220 mm
Even when the device is used properly and all safety
regulations are complied with, there still may be
19 m/s
some residual risks.
• noise emissions
44 kg
• dust emissions
• vibrations to hand and arms
• Danger of burns
87 dB (A)
Tool and workpiece heat up during operation.
100 dB (A) • Risk of injury
Sharp tools and workpiece edges
Emergency procedure
Conduct a first-aid procedure adequate to the injury and
summon qualified medical attendance as quickly as pos-
sible. Protect the injured person from further harm and
calm them down. If you seek help, state the following
pieces of information: 1. Accident site, 2. Accident type,
3. Number of injured persons, 4. Injury type(s)
Symbols
WARNING/CAUTION!
Warning against thrown-off items
Warning against dangerous electric
voltage
Keep distance of persons
Observe to keep out of dangerous zone
WARNING - Read the operating instruc-
tions to reduce the risk of injury.
Unplug the machine before any work
on it.
Wear eye protective goggles !
Wear ear protectors!
Wear a suitable dust protection mask.
Safety shoes to be used
Use appropriate lifting equipment for trans-
portation. The load must be balanced.
ENGLISH
15