oventrop Unibox TQ RTL Notice D'utilisation page 39

Unibox TQ RTL
QUESTION
102273980-V01.06.2019
RESPONSE
- The volume flow and pressure loss may increase.
- Observe the pressure loss and noise characteristic line of
the radiator fittings.
- Adjust the bypass valve so that a sufficient amount of water
flows through the surface temperature balance circuit.
- No noise must be perceivable when the valve is closed.
Option 3:
1
Illustr. 17: Connection with "Unibox RLA"
(1) Bypass valve
(2) "Unibox RLA"
- The volume flow and pressure loss may increase.
- Observe the pressure loss and noise characteristic line of
the radiator fittings.
- Adjust the "Unibox RLA" bypass valve so that a sufficient
amount of water flows through the surface heating system.
2
Appendix
39