Beko WTA 10712 XSWR Manuel D'utilisation page 17

• Spin+Drain
Use this program to remove the water on the
clothe/in the machine.
Before selecting this programme, select the
desired spin speed and press Start/Pause
button. First, the machine will drain the water
inside of it. Then, it will spin the laundry at
the selected spin speed, and drain the water
coming off of the laundry.
If you only want to drain the water without
spinning the laundry, select the "Spin+Pump
programme, and use the Spin Speed
Adjustment button to select the No Spin
function. Press the Start/Pause button.
C
INFORMATION
• Use a lower spin speed for delicate
laundries.
4.3.8 Temperature selection
Whenever a new programme is selected, the
recommended temperature for the selected
programme appears on the temperature indicator.
To decrease the temperature, press the
Temperature Adjustment button. Temperature
will decrease gradually. When the cold level is
selected, temperature level lights will not be on.
C
INFORMATION
• If the programme has not reached
the heating step, you can change the
temperature without switching the machine
to Pause mode.
4.3.9 Spin speed selection
Whenever a new programme is selected, the
recommended spin speed of the selected
programme is displayed on the spin speed indicator.
To decrease the spin speed, press the Spin
Speed Adjustment button. Spin speed decreases
gradually. Then, depending on the model of the
product, "Rinse Hold" and "No Spin" options
appear on the display. When the "No Spin" function
is selected, rinse level indicator lights will not be on.
Rinse hold
If you are not going to unload your clothes
immediately after the programme ends, you can use
rinse hold function to keep your laundry in the final
rinsing water in order to prevent them from getting
wrinkled when there is no water in the machine.
Press Start/Pause button after this process if you
want to drain the water without spinning your
laundry. Programme will resume where it left off,
17 / EN
drain the water and then it will be complete.
If you want to spin the laundry held in water, adjust
the Spin Speed and press Start/Pause button.
Programme will resume. Water will be drained,
laundry will be spun and the programme will end.
C
INFORMATION
• If the programme has not reached the spin
step, you can change the spin speed without
switching the machine to Pause mode.
4.3.10 Auxiliary function selection
Select the desired auxiliary functions before
starting the programme. You can also select
or cancel auxiliary functions suitable for the
running programme without pressing the Start/
Pause button while the machine is operating.
To do this, the machine must be in a step
before the auxiliary function you are going to
select or cancel. If the auxiliary function cannot
be selected or canceled, light of the relevant
function will flash 3 times to warn the user.
C
INFORMATION
• If a second auxiliary function conflicting with
the first one is selected before starting the
machine, the function selected first will be
canceled and the second auxiliary function
selection will remain active.
• An auxiliary function which is not compatible
with the programme cannot be selected.
(See "Programme and consumption table")
• Auxiliary Function buttons may vary
according to the model of the machine.
4.3.10.1 Auxiliary functions
Prewash
•
A Prewash is only worthwhile for heavily soiled
laundry. Not using the Prewash will save
energy, water, detergent and time.
C
INFORMATION
• Prewash without detergent is
recommended for tulle and curtains.
• Fast+
When this function is selected, durations of
relevant programmes get shorter by 50%.
Thanks to the optimised washing steps,
high mechanic activity and optimum water
consumption, high washing performance is
achieved in spite of the reduced duration.
Washing Machine / User Manual