Bit 0; Bit 1; Bit 2; Bit 3 - S+S Regeltechnik HYGRASGARD RFTF Notice D'instruction

G
®
HYGRASGARD
Function 02 Read Discrete Input
Register
0x0001 Multi-coloured LED 1
Multi-coloured LED 2
0x0002
0x0003 Multi-coloured LED 3
Multi-coloured LED 5
0x0004
0x0005 Multi-coloured LED 6
0x0006 Set / Clear LED button status
0x0007 Brightness LCD-backlighting
Function 02 Read Discrete Input
Register
1x0001 Presence button /
LED status
1x0002 Presence button
1x0003 Presence button
Note: The addresses 1x0004...1x0008 are read with the value "0".
Function 08 Diagnostics
The following sub function codes are supported
Sub Function Parameter
Code
00 Echo of transmission data
(Loopback)
01 Restart Modbus
(Reset listen-only mode)
04 Activation listen-only mode
10 Delete counter
11 Counter bus telegrams
12 Counter communication errors
(Parity, CRC, frame errors, etc.)
13 Counter exception telegrams
14 Counter slave telegrams
15 Counter telegrams without answer
Function 17 Report Slave ID
Composition of answer telegram
Byte No. Parameter
00 Number of bytes
Slave ID (device type)
01
02 Slave ID (device class)
03 Status
04 Version number (release)
05 Version number (version)
Version number (index)
06
RFTF - Modbus | Telegrams
Parameter
Parameter
pressed /
set
released
current
Data Type

Bit 0

Bit 1

Bit 2

Bit 3

Bit 4

Bit 5

Bit 6

Data Type
Bit 0
Bit 1
Bit 2
Data Type Answer
Echo data
Echo telegram
No answer
Echo telegram
Unsigned 16 Bit All valid bus telegrams
Unsigned 16 Bit Faulty bus telegrams
Unsigned 16 Bit Error counter
Unsigned 16 Bit Slave telegrams
Unsigned 16 Bit Broadcast messages (address 0)
Data Type Answer
Unsigned 8 Bit 6
Unsigned 8 Bit 11 = HYGRASGARD
Unsigned 8 Bit 20 = HYGRASGARD
Unsigned 8 Bit 255 = RUN, 0 = STOP
Unsigned 8 Bit 1...9
Unsigned 8 Bit 1...99
Unsigned 8 Bit 1
22
Value Range
0 / 1 OFF - ON
0 / 1 OFF - ON
0 / 1 OFF - ON
0 / 1 OFF - ON
0 / 1 OFF - ON
0 / 1 CLEAR - SET
0 / 1 OFF - ON
Value Range
0 / 1 OFF - ON
0 / 1 OFF - ON
0 / 1 OFF - ON
® MODBUS
®
/ HYGRASREG
®