Technical Data; Safety Instructions - WOLFF MAMBO 230 V Mode D'emploi

Comes with:
Grinding machine Mambo
safety- and suction ring
additional weight with fixing belt
ear protectors
operation manual
safety- and suction ring
fixing belt
09/2004 Schleifmaschine MAMBO, Artikel-Nr. 013495, ab 324 vom

1.0 Technical Data

Power supply . . . . . . .110V 50 Hz (110 V 60 Hz, 230V 50 Hz)
Power consumption . . . . . . . .2300W (110 V), 2500 W (230 V)
No-load speed . . . . . . . . . . . . . . . . . . .160 - 450 Strokes/min
Sound pressure level . . . . . . . . . . . . . . . . . . . . . . . . .54 dB(A)
Sound energy level . . . . . . . . . . . . . . . . . . . . . . . . . .67 dB(A)
Hand/Arm-Vibration . . . . . . . . . . . . . . . . . . . . . . . .< 4,5 m/s2
Weight . . . . . . . . . . . . . . . . . .46 kg + 20 kg additional weight
Diameter of discs . . . . . . . . . . . . . . . . . . . . . . .375 - 400 mm
2.0 Safety
The Grinding machine Mambo is state of the art designed and
meets all standard safety requirements.

3.0 Safety instructions

Disconnect the power supply before any maintenance is carried
out.
Use only recommended mounting discs and brushes. The
mounting discs must have a plain surface. Use only genuine
Wolff discs and brushes. Other parts could affect the safety of
the machine.
Always use the safety- and suction ring. Otherwise parts of the
subfloor may be cast out and endanger other persons.
Always lock the additional weight with the fixing belt. Use only
the genuine Wolff weight. Do not use any other weights!
Maintenance should be undertaken only by qualified personnel.
Use only genuine Wolff spare parts.
Use only appropriate detergent liquids.
Check the power cord and the plug before starting. Both of them
must be in perfect condition, the insulation must not be damaged.
Have damaged insulation repaired at once, before starting the
machine.
Otherwise this may result in considerable danger to the user.
Speed control
For your own safety start work always at low speed, and then
increase the speed. This is especially important, if the subfloor
condition or the discs used are not well known.
21-09-04Fugenfräse FRÄSMASTER 12