Comes with:
Concrete grinding machine BS 180
Tools
Ear protection
Goggles
Carrying case
Operation manual
Always wear goggles and ear protectors!
Use this machine only
as instructed in this operating manual
with the machine in perfect working order.
Wolff cannot be held responsible for any damage or
loss caused by incorrect use. Correct use also includes
to take care of all directions from the operating
manual and
the execution of maintenance and service.
Bodenschleifer BS 180, Artikel Nr. 015930
1.0 Technical data
Power supply
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power consumption
. . . . . . . . . . . . . . . . . . . . . .
RPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6.500 Rpm
Working width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180 mm
Sound pressure level . . . . . . . . . . . . . . . . . . . . . . . . . .90 dB(A)
Sound energy level . . . . . . . . . . . . . . . . . . . . . . . . . .103 dB(A)
Hand/Arm-Vibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 m/s
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7,8 kg
2.0
Declaration of Conformity
We declare under our sole responsibility that this product is in con-
formity with the following standards of standardization documents:
DIN EN 1037, EN ISO 12100, DIN EN 60204-1, DIN EN 60745-1,
DIN EN 60745-2-3, DIN EN 55014-1, DIN EN 55014-2
according to the provisions of the: 2006/42/EC, 2004/108/EC,
2006/95/EC.
Dipl.-Ing. (FH) Dieter Hammel
Authorised to issue this declaration and for the gathering of the techni-
10.02.2015, i.V.
WOLFF GmbH & Co. KG | D-74360 Ilsfeld | Ungerhalde 1
3.0 Safety instructions
Disconnect the power supply before any maintenance is carried
out. Use only recommended blades and ensure it is fastened
before starting. Maintenance should be undertaken only by qualified
personnel. Use only genuine Wolff spare parts.
Using this machine without ear protectors or goggles may jeo-
pardize or harm your health. It may harm especially your ears
resp. your eyes and increase the risk of an accident.
3.1 Introduction
This operating manual should be used to get the most benefit
from your Concrete grinding machine BS 180. Following these
instructions will both extend the life of your machine and reduce
repair costs. Please ensure any user of the machine is fully familiar
with the operating instructions before allowing work to start.
3.2 Danger while working with the machine
The Concrete grinding machine BS 180 is designed to the highest
technical standards. Incorrect use can be dangerous! Disturbances
that could impair safety, have to be eliminated at once.
3.3 Restriction of use
The Concrete grinding machine BS 180 is exclusively for grinding
subfloors removing uneven sections in dry environments. It
should not be used for any other purpose.
cal documentation.
.230 V AC
.2.000 W; 10A
2
10