Use - WOLFF MAMBO 230 V Mode D'emploi

(2)
(1)
5
09/2004 Schleifmaschine MAMBO, Artikel-Nr. 013495, ab 324 vom

5.0 Use

Inserting the safety- and suction ring
Lay the machine down on the handle. Thus the support of the
discs is accessible.
insert safety- and suction ring
mount at once a disc to fix the suction ring
Assembly of mounting discs, pads and brushes
Lay the machine down on the handle. Thus the support of the
discs is accessible. Put the mounting disc on the actuation and
lock it by turning anti-clockwise.
Mounting the additional weight
Always lock the additional weight with the fixing belt. Use only
the genuine Wolff GmbH weight.
Do not use any other weights! This may overstress the machine.
Use
Mount discs or brushes as described above.
Put the handle in working position with the big lever (1) at
the back.
We recommend to position the hand grip in the height of
the users hip.
(3)
Lift the handle slightly, to make sure the machine stands
horizontally.
Keep safety switch (2) pressed.
Switch on the machine with one of the levers (3) located
beneath the grip.
Release switch (2).
Note: lever can only be actuated, if the handle is not in vertical
position. This is a safety feature! The user cannot control the
machine with vertical handle. After switching on the machine,
the handle will move shortly to the right.
If the transportation wheels are in lifted position, the direction in
which the machine moves, is controlled by lifting or lowering the
grip. The more you lift or lower the grip, the faster the machine
runs to the corresponding direction.
lifting the grip: machine runs to the right
lowering the grip: machine runs to the left.
If you feel unsafe or cannot control the machine just release
lever (3). The machine will stop at once.
If you have carried out some training, you will be able to opera-
te the machine with one hand.
If the transportation wheels are lowered to the floor, the machi-
ne is stabilised and easier to control.
Lifting and lowering of the handle is no more necessary.
The machine has to be in a levelled position. The wheels
have to be fixed accordingly.
By loosening the release handle (5), the wheels can be put in
upper and lowered position.
21-09-04Fugenfräse FRÄSMASTER 14