AQUALUX 104269 Notice D'installation Et D'utilisation page 17

Settings
- Required temperature
- Clock
TIME ON indicator
TIME ON setting
PICTOGRAMS
CLOCK
PERMANENT DISPLAY
- The display shows the time when the machine is turned off.
- The display shows the temperature of the water in the pool when the machine is turned on.
ADJUSTING THE WATER TEMPERATURE
- Press and to adjust the temperature.
The temperature flashes.
- After five seconds, the display stops flashing.
ADJUSTING THE TIME
- Press to adjust the operating times.
- The time flashes. Press the time button
- Press and to change the settings.
- Before the display stops flashing, press
- Press and to change the settings.
- Press and the temperature of the water appears.
- After 30 seconds, the display stops flashing.
AUTOMATIC MODE
TIME ON
- Press
TIME ON
- When the display comes on and the time flashes, press
- Press and to change the settings. Before the display stops flashing, press
- Press and to change the settings.
- Once you have finished, press
- After 30 seconds, the display stops flashing.
TIME OFF
- Press
TIME OFF
- When the display comes on and the time flashes, press
NOTPACBYAQUALUX - ind H - 02/15
TIME OFF setting
AUTOMATIC
(can be changed when the machine is on or off)
to set the time when the heat pump starts.
TIME ON
to set the time when the heat pump stops.
TIME OFF setting
AUTOMATIC STOP
(can be changed when the machine is on or off)
again to change the times.
to set the minutes.
TIME ON
and the temperature of the water appears.
TIME OFF
16 /38
Hot
On / Off
Time setting
HEATING
again to set the hour.
to set the minutes.
again to set the hour.