Overlay Text; Date/Time - Abus IPCA22500 Manuel Utilisateur

FTP password:
FTP server port:
Path:
FTP mode:
Create a folder:

10.4.3 Overlay text

This function allows certain text, the date and time to be superimposed on to the video.
Activate overlay text:
Date:
Time:
Text activated:
Text:

10.4.4 Date/time

Current date and time:
Time zone:
Enable daylight savings time:
NTP server synchronisation:
NTP server:
NTP update interval:
PC time synchronisation:
Manual:
Enter the password from the FTP server account.
Enter the FTP port of the server. The default for the FTP port is 23.
If necessary, enter another path (subfolder on the FTP server).
Port: Active FTP mode
PASV: Passive FTP mode
If this function is enabled, the camera automatically places sub-
folders on the FTP server with date (for example:
folder/20160527/121032m.avi).
ticking the checkbox activates the function.
superimposes the date
superimposes the time
activation of text
assignment of text. Up to a maximum of 16 characters can be
assigned. Permissible characters are: A-Z, a-z, 0-9
the current date and time settings are displayed here.
select the time zone in which the camera is located.
by ticking the checkbox, you are confirming that the location
in which the camera is installed takes part in daylight savings
time.
Auto: the camera automatically uses the switch-over times
every year.
Manual: manual switch-over time settings.
tick the box for the camera to automatically obtain the date
and time from a server (please note: the NTP server does
not hold any information on the summer/winter time
changeover).
enter the domain name or the IP address of the time server
here.
update interval for the date and time with the server. An
update also takes place when the camera is restarted.
when you save, the date and time from the connected client
PC are adopted.
manual assignment of date and time
99