Status Indicators; Output - Abus IPCA22500 Manuel Utilisateur

6.9 Status indicators

Display LED
LED to display supply voltage
(green)
Status LED (blue)
6.10 Connection instructions for audio input/output
Audio input
Audio output
Function
If the LED is active and uninterrupted, the supply voltage is
correct and available.
a) LED flashes 1/s
-> Camera is starting up, booting process
b) LED deactivated (LED displaying supply voltage is
permanently active)
-> Camera start-up process has finished, functional status
normal
c) LED permanently on
-> Fault. Network connection not possible.
If it is not possible to access the camera, try to reset the camera
using the reset button.
Connection for microphone with pre-amp
Input impedance: 32 kOhm
Mic voltage: max. 1 Vrms
Connections: GND (1), Input (3)
Output impedance: 32 kOhm
Output voltage: 1 Vrms
Connections: GND (1), Output (3)
74