Krüger & Matz KM0528M Mode D'emploi page 8

oPeration
turn on/off:
Set the power switch to ON position to turn on the speaker; blue LED flashes. Set the
power switch to OFF position to turn off the speaker; blue LED goes off.
Music playback:
press play/pause button to pause or play music.
Music selection/ Volume adjustment:
press previous/Volume down button to go to the previous track; press and hold this
button to decrease volume. press Next/Volume up button to go to the next track;
press and hold this button to increase volume.
bluetooth Mode
1. Make sure the speaker is turned on in the Bluetooth mode (the speaker beeps
twice and blue LED flashes quickly).
2. please keep the speaker and external device close to each other when pairing.
3. Enable the Bluetooth function on the external device and search for new
Bluetooth devices.
4. Select and connect with this device (kM Adventure Mini).
5. The speaker will issue a sound signifying successful pairing; blue LED flashes
slowly.
Notes:
• Every time the speaker is switched on, it will connect to last connected device
automatically. please note, your device must be on with Bluetooth function
turned on.
• When the USB device or microSD card is connected with the corresponding
inputs of the speaker while in Bluetooth mode, the speaker will automatically
quit Bluetooth mode and enter USB or microSD card mode. press Mode button
to switch back to Bluetooth mode or change between the modes.
auX Mode
1. Turn on the speaker.
2. Use 3,5 mm AUX cable and connect one end of the cable into the external device's
3,5 mm output; then connect the other end of the cable into the speaker's 3,5
mm input.
3. press Mode button to switch to AUX mode (blue LED flashes slowly).
4. Start playing music from your device (while playing music blue LED flashes
slowly).
8
Owner's manual