General Safety Instructions
Read the operating instructions carefully before putting the
appliance into operation and keep the instructions including the
warranty, the receipt and, if possible, the box with the internal
packing. If you give this device to other people, please also pass
on the operating instructions.
•
The appliance is designed exclusively for private use
and for the envisaged purpose. This appliance is not fi t
for commercial use. Do not use it outdoors (except if it is
designed to be used outdoors). Keep it away from sources
of heat, direct sunlight, humidity (never dip it into any liquid)
and sharp edges. Do not use the appliance with wet hands.
If the appliance is humid or wet, unplug it immediately.
•
When cleaning or putting it away, switch off the appliance
and always pull out the plug from the socket (pull on the
plug, not the cable) if the appliance is not being used and
remove the attached accessories.
•
Do not operate the machine without supervision. If you
should leave the workplace, always switch the machine off
or remove the plug from the socket (pull the plug itself, not
the lead).
•
Check the appliance and the cable for damage on a regular
basis. Do not use the appliance if it is damaged.
•
Do not try to repair the appliance on your own. Always
contact an authorized technician. To avoid the exposure
to danger, always have a faulty cable be replaced only by
the manufacturer, by our customer service or by a qualifi ed
person and with a cable of the same type.
•
Use only original spare parts.
•
Pay careful attention to the following "Special Safety Instruc-
tions".
Children and Frail Individuals
•
In order to ensure your children's safety, please keep all
packaging (plastic bags, boxes, polystyrene etc.) out of their
reach.
Caution! Do not allow small children to play with the foil as
there is a danger of suffocation!
•
In order to protect children or frail individuals from the ha-
zards of electrical equipment, please ensure that this device
is only used under supervision. This device is not a toy. Do
not allow small children to play with it.
Special Safety Instructions
•
Do not suck up liquids!
•
Do not suck up hot ashes or pointed or sharp objects!
•
Do not use the appliance in humid rooms!
•
Never use without the fi lter. Check that the fi lter is inserted
correctly!
•
Hair, clothing and body parts away from the vacuum nozzle
during use!
•
Keep the vacuum cleaner away from sources of heat like
radiators, ovens, etc.!
05-BS 1264 25
Overview of the Components
1 Vacuum power regulator
2 On/off switch
3 Carrying handle
4 Cable-winding key
5 Dust bag compartment
6 Dust bag fi lling display
7 Handle for opening the
dust bag compartment
8 Filter cover - Outlet fi lter
9 Hose connection
10 Vacuum hose
11 Suction tube
12 Floor nozzle
13 „2-in-1" nozzle
(groove and brush nozzle)
14 Parking assistance
Hook on the suction tube (not shown)
Start-up
•
Insert the connection head of the suction hose (10) into the
hose connector (9) until it locks in place. To do so, please
press the buttons simultaneously. In order to release the
hose again, please press the buttons once more on the
connection head.
•
Keep the buttons pressed down and then pull out the hose.
•
Please insert the sections of the 2-part suction tube (11) into
one another and then attach them to the handle section.
•
Then assemble the fl oor nozzle (12) and/or the accessories.
Using the Appliance
1. Unwind the length of cable you require.
2. Insert the mains plug into a correctly installed 230 V, 50 Hz
power socket. Turn the vacuum cleaner on by pressing the
on/off switch (2) down with your foot.
3. Vacuum at a steady speed. There is no need to exert
pressure.
Attention: pay attention to the range that can be covered with
the cable length.
Cable winding device
Pull out the cable up to the maximum length indicated with the
yellow mark. Never pull the cable out up to the red mark as the
cable winding can be damaged. Said damages are not covered
by the warranty.
Winding
Press the cable (4) winding button and guide the cable. Hold the
cable to avoid wrapping.
25
28.03.2007, 8:33:52 Uhr