Sony HT-A9 Mode D'emploi page 24

Masquer les pouces Voir aussi pour HT-A9:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

5
On the TV, search the speaker
system by performing the pairing
operation.
The list of the BLUETOOTH devices
that are detected appears on the TV
screen.
For the operation method to pair the
BLUETOOTH device to the TV, refer
to the operating instructions of the
TV.
6
Pair the speaker system and TV by
selecting "HT-A9" from the list on
the TV screen.
7
Make sure that [TV (BT)] appears in
the front panel display.
A connection between the speaker
system and TV has been
established.
8
Select the program or input of the
device by using the TV remote
control.
The sound of the displayed image
on the TV screen is output from the
speaker system.
9
Adjust the volume of the speaker
system by using the TV remote
control.
When pressing the muting button
on the TV remote control, the sound
is muted temporarily.
Notes
• If the TV sound is not output from the
speaker system, press TV and check the
status of the front panel display.
– [TV (BT)] appears in the front panel
display: The speaker system and TV are
connected, and TV sound is output from
the speaker system.
– [PAIRING] appears in the front panel
display: Perform pairing on the TV.
– [TV] appears in the front panel display:
Perform steps from the start.
• When you connect the speaker system
and TV with an HDMI cable, the
BLUETOOTH connection is canceled. To
connect the speaker system and TV with
24
GB
the BLUETOOTH function again,
disconnect the HDMI cable, then perform
the connecting operation from the start.
Listening to Sound of the
Paired TV
1
Turn on the TV with the TV remote
control.
The speaker system is turned on by
interlocking with the TV power and
TV sound is output from the speaker
system.
2
Select the program or input of the
device by using the TV remote
control.
The sound of the displayed image
on the TV screen is output from the
speaker system.
3
Adjust the volume of the speaker
system by using the TV remote
control.
When pressing the muting button
on the TV remote control, the sound
is muted temporarily.
Tip
When the TV is turned off, the speaker
system is also turned off by interlocking
with the TV power.

Publicité

Chapitres

Table des Matières
loading

Table des Matières