Sony DSR-45 Mode D'emploi page 45

AC timer recording
By connecting this unit to an external AC timer (not
supplied), you can start recording at a preset time.
1
Connect this unit to an external AC timer (not
supplied).
Recording
source
(external tuner,
etc.)
VIDEO IN REF. IN
AC timer
to an AC outlet
2
Insert a tape for recording.
3
Set the INPUT SELECT selector of this unit to
select the input signal.
4
Set the TIMER selector on the front panel of this
unit to REC.
5
Set the timer-on time on the connected AC timer.
At the preset time, the power of this unit turns on
automatically and recording starts after a few
seconds (no more than 30). Set the timer allowing
a margin for the recording to start. You do not
need to press the REC button.
Note
When you intend to turn the unit off, press the STOP
button on this unit to stop the tape transport operation
beforehand.
If you turn the unit off while a tape is running, for
example, by using an AC timer, the unit or the tape
may be damaged.
DSR-45/45P (rear panel)
If the tape ends before the recording source
stops operation
The tape stops.
To stop recording during timer recording
Press the STOP button on this unit.
To release the AC timer recording mode
Set the TIMER selector on the front panel of this unit
to OFF.
Chapter 2 Playback and Recording
45
(GB)