Cabinet Cutout Dimensions - KitchenAid KBNU271VSS Instructions D'installation Et Guide D'utilisation Et D'entretien

Enclosure and clearance dimensions that are shown must be
used. Given dimensions provide required clearances.
The installation of this grill must conform with local codes or, in
the absence of local codes, with either the National Fuel Gas
Code, ANSI Z223.1/NPFA 54, Natural Gas and Propane
Installation Code, CSA B149.1, or Propane Storage and Handling
Code, B149.2.
The dimension chart and illustration below include cutout dimensions and minimum spacing requirements for all built-in outdoor
products. The illustration is for reference. The design of your cabinet layout can be personalized, but the dimensions for the cutouts and
minimum spacing must be followed.
*NOTE: Maintain a minimum ³⁄₄" (1.9 cm) countertop overhang from the door/drawer mounting surface to help keep water runoff from
the countertop out of the door or drawer.
(from cabinet face )
K
B
*Each corner of countertop cutouts for built-in grill, side burner, sear burner, power burner and refreshment center.

Cabinet Cutout Dimensions

C
C
E
K
J
K
M
Copies of the standards listed may be obtained from:
CSA International
8501 East Pleasant Valley Rd.
Cleveland, Ohio 44131-5575
NOTE: The grill drops into the opening and is supported by its
side flanges. Do not use a bottom support.
D
L
K
F
(from cabinet face )
D
K
G
E
A
H
7