OPERATION - Ventilation
WARNING:
Set the switch to position 'OFF' before connecting the plug to the wall socket; this will make sure that the
appliance does not start immediately.
1. Place the fan on a stable surface and ensure that the grilles for the supply and removal of the air are
unobstructed.
2. The device has a speed switch with 8 positions (see Figure 3). Select the desired function (see table)
using the switch.
MARKING
OFF
LOW
MID
HIGH
LOW
MID
HIGH
CLEANING AND MAINTENANCE
From time to time dust can accumulate in the fan housing, and on the fan blades. Remove the dust with a
brush and/or vacuum cleaner.
WARNING:
•
Verify that the appliance is not connected to the power supply before you clean it.
•
Make sure no moisture gets into the appliance.
•
Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes) to
clean the appliance.
FUNCTION
Power off
Low speed
Medium speed
High speed
Low speed and Oscillation
Medium speed and Oscillation
High speed and Oscillation
25
Figure 3. Control switch
EN