Bestron DFT430 Mode D'emploi page 24

OPERATION - General
The appliance is intended
only for domestic use,
not for professional use.
1. Control switch
2. Front grill
3. Foot
4. Power cord and plug
OPERATION - Before use for the first time
Remove the fan from the packaging and remove all packaging materials.
OPERATION - Assembling the foot
1. Slide the two halves of the foot into each
other. Make sure that the fan's power cord
runs through the opening, with the plug at the
bottom side of the foot.
2. Use the three screws to mount the foot to the
bottom of the fan (A).
3. Place the power cord in the notch under the
foot (B).
Figure 2
Assembling the foot
24
1
2
3
EN
4
Figure 1