Novy Mini Pure'line 810 Instructions D'installation page 18

Connection for window contact
This hood is equipped with a connection for a contact window switch. If the hood is to work simultaneously with a heat-
ing appliance that pulls air from the room, and if the required supply of fresh air can only be through an open window, it
is possible to connect a window contact switch (not included) to the hood. This ensures that the hood only works if the
window is open. If the window is closed, the fan can not be switched on. A window contact cable set is available as an
accessory (part number 990.033). Using the cable set, it is possible to make a connection between the hood controller to
the outside of the hood. A window contact switch can then be connected (not included).
Various accessories
- Clamp Ø60-215 mm
- Aluminium tape (per 50 m)
- Stainless steel cleaner
Accessories flat exhaust channel
- Flat exhaust channel length 1000 mm (dimensions: 89x222x1000 mm)
- Connection piece (dimensions: 94x227x80 mm)
- Horizontal curve (dimensions: 94x227x290 mm)
- Vertical curve (dimensions: 94x175x227 mm)
- Curve 15° (dimensions: 94x227x138 mm)
- Corner adapter (dimensions: 94x227x205 mm)
- Transition piece to Ø150 mm (dimensions: 94x227x190 mm)
- Stainless Steel blind grill with non-return valve (dimensions: 290 x 160 mm)
Accessories circular exhaust channel
- Circular exhaust channel length 1000 mm Ø150 mm
- Connection piece Ø150 mm
- Curve 90° Ø150 mm
- Aluminium external grill for Ø150 mm
- Mechanical external grill Ø150 mm
- Non-return valve Ø150 mm
Characteristics of the product on condition of changes or printing errors, March 2019.
906.291
906.292
906.060
906.401
906.402
906.403
906.404
906.418
906.405
906.406
906.407
906.415
906.417
906.416
906.178
906.419
906.432
EN 18