Using The Stand Mixer - Wolf Gourmet WGSM100 Guide D'utilisation Et D'entretien

Using the Stand Mixer

WARNING
removing attachments. Failure to do so can result in broken bones or cuts.
1. Before inserting or removing attachments, always make sure stand mixer is
unplugged and setting control is set to OFF ( ).
2. Place the bowl into bowl lift. Rotate the handle
counterclockwise until it lowers into place.
3. Select desired attachment for recipe. See "Mixing
Guide" on page 9. Insert the attachment into the
attachment coupling and press upward. Turn the
attachment counterclockwise until it locks into place
on the attachment coupling.
4. To raise the bowl, rotate the bowl handle clockwise
until it lifts and locks into the raised, mixing position.
5. Attach the splash/pouring shield on the bowl by
positioning the open end around the attachment and
placing it securely on the bowl.
6. Plug stand mixer into wall outlet.
7. Rotate the speed control dial to the desired setting.
8
Entanglement Hazard. Unplug mixer before inserting or