Using The Stand Mixer - Wolf Gourmet SM09 Série Manuel D'entretien Et D'utilisation

Using the stand mixer

WARNING
removing attachments. Failure to do so can result in broken bones or cuts.
1.
Before inserting or removing attachments, always make sure stand mixer is unplugged
and speed control is set to OFF ( ).
2. Place the bowl into the bowl lift. Rotate the handle anti-
clockwise until it lowers into place.
3. Select desired attachment for recipe. See 'Mixing guide'
on page 9. Insert the attachment into the attachment
coupling and press upwards. Turn the attachment anti-
clockwise until it locks into place on the attachment
coupling.
4.
To raise the bowl, rotate the bowl handle clockwise until
it lifts and locks into the raised, mixing position.
5. Attach the splash/pouring shield to the bowl by
positioning the open end around the attachment and
placing it securely on the bowl.
6. Plug stand mixer into electric socket.
7. Rotate the speed control dial to the desired setting.
8
Entanglement hazard. Unplug mixer before inserting or