Care And Maintenance - Bosch SHS863WD2N Notice D'utilisation

en-us Care and Maintenance
You can switch the Infolight on or off.
Off
‚:‹‹
low
‚:‹‚
To change the setting:
Open the door.
1.
Press the On/Off button (.
2.
Hold down function key # and
3.
press Start button P until the
display 8 indicates š:‹x (x can
be any number). Release both
buttons.
Press function key # until the
4.
display shows ‚:‹‚.
Press the function key 3 to
5.
switch the InfoLight
‚:‹‚ or off ‚:‹‹.
Press Start button P to save
6.
the setting.
Intensive drying
The final rinse uses a higher
temperature which improves the
drying result. The cycle time may
increase slightly. (Caution if utensils
are delicate!)
This feature has two settings:
š:‹‹ Off
š:‹‚ On
Open the door.
1.
Press the On/Off button (.
2.
Hold down function key # and
3.
press Start button P until the
display 8 indicates š:x (x can
be any number).
Release both buttons.
4.
Press function key # until the
5.
display 8 indicates the factory
set value š:‹‹.
Press function key 3 to switch
6.
the Extra dry feature on š:‹‚ or
off š:‹‹.
Press Start button P to save
7.
setting.
30
feature on
®
2
Care and
Maintenance
A regular inspection and
C a r e a n d M a i n t e n a n c e
maintenance of your machine will
help to prevent faults. This saves time
and prevents future problems.
Overall condition of the
dishwasher
NOTICE
Never use a steam cleaner to
■
clean your dishwasher. The
manufacturer is not liable for any
resulting damage.
Regularly wipe the front of the
■
appliance with a damp cloth -
water and a small amount of
liquid soap is adequate. Do not
use sponges as they could
scratch the surfaces.
Do not use bleach-based wipes
■
as they could damage the surface
or printing.
Stainless steel appliances: To
■
prevent corrosion, do not use
sponges or chlorine based
cleaners. Use a stainless steel
polish to seal and protect the
surface. Do not use chlorine
based cleaners or wipes.
Clean the outer edges of the
■
inside door panel regularly to
remove debris that may collect
from normal loading. If spots
begin to appear on the stainless
steel, make sure the rinse agent is
full and functioning properly.
Clean the door seal regularly with
■
a damp cloth to remove food
particles that may collect from
normal loading and cause odor. A
soiled door seal may not seal
properly.