Functions Of Tergum System; Remote Control - HOESCH TERGUM Instructions De Montage Et D'utilisation

09

Functions of Tergum system

09.01 Remote control

2
5
GB
8
10
When minimum level of bathtub fi lling is reached, it is
ready to use- alternatively the level should be raised to the
upper back jet level
20
1
3
4
6
7
9
11
1 Tergum system on/off
Press the button shortly. After switching the
whirl system on the pump starts working with
full power.
2 By permanently pressing the +/- buttons you
can individually adjust the power. By pressing/
holding those buttons the pump power is
decreased or increased.
4 not available
5 not available
3/6 Interval mode ON/OFF
With the active interval mode the massage
power changes periodically from the lowest to
the highest.
In order to stop the interval mode press the
buttons again.
7 not available
8 Whirlpower ON/OFF
Can be additionally switched on and off in the
Whirl mode.
9 LED underwater light on/off- option
During LED chrome therapy, white colour is
activated at pushing the button. Pressing the
button again turns on red, orange, yellow,
green, indygo, violet colours, colours sequence
I, colours sequence II. To turn off, the button
should be pressed continuously for 4 seconds.
10 not available
11 Switch off everything
switching all functions off