Cursor Buttons; Tack Button; Twin Needle Button; To Turn Off The Audible Beep - Singer 4060 Notice D'utilisation

J. CURSOR BUTTONS
When decorative & letter stitch sewing, you can
check and edit combined patterns or letters by
pressing these buttons.
K. TACK BUTTON
UTILITY STITCH SEWING
By pressing this button, you can sew a tack stitch
at the beginning and at the end of a stitch. (SEE
PAGE 38)
DECORATIVE & LETTER STITCH SEWING
If this button is pressed at the end of a decorative
stitch pattern, machine will stop automatically at
the end of the stitch pattern and tie off the stitch
with a locking stitch.
L. TWIN NEEDLE BUTTON
If you attach the twin needle, press this button.
Machine will reduce the stitch width.
(SEE PAGE 86)
TO TURN OFF THE
AUDIBLE BEEP
You can operate the machine without the audible
beep.
1. Turn off the power switch.
2. Turn on the power switch while pressing the
EDIT button and the function F1 button.
3. This function is kept off until the machine is
turned off.
This function turns off the single beep only.
Multiple beeps will not turn off.
TO ADJUST THE
CONTRAST OF LCD
The contrast of LCD is adjusted as indicated
below.
1. Turn the power switch to the OFF position.
2. Turn the power switch to the ON position while
pressing the EDIT button.
3. Adjust the contrast by pressing F4, F5 buttons.
While in this mode, you can also turn off the
audible beep by pressing F2 button. (To turn on,
press F3 button.)
4. Press the F1 button to return to regular mode.
26