Blades - Texas A/S El-Tex 750 Manuel D'utilisation

When you want the machine to work in deep soil, the most effective way is to let the ma-
chine move forward one arms length. Then pull the machine back towards you. Then
move forward again.
The blades must always run at the highest speed. Make sure they are not overloaded.
Use one of these work patterns when preparing an area for sowing.

6. Blades

If the blades are worn or break they can be replaced. See fig. 6. Lack of maintenance will
lead to poor cultivating results or overload of the engine. Always use gloves when working
near the blades.
The blades may only be replaced as a set. Remove the outer lock pin and the outer
blades, then the inner lock pin and the inner blades. (fig. 6).
14