Krüger & Matz KM0542 Mode D'emploi page 16

Note:
• Every time the speaker is switched on, it will connect to last connected device
automatically. Please note, your device must be on with Bluetooth function
turned on.
troubleShooting
Problem
No power
No sound
One channel is not working
Main speaker is not working • Check the audio input cable
Distorted sound at high
volume
USB/SD are not working
Poor sound quality of FM
radio
16
Possible solution
• Check if the power cord is properly connected
• Check the position of power switch (it should be
set in ON position
• Check if the input and output cables are
properly connected
• Check the audio input and output
• Reduce the volume
• Check if the mode is set to USB/SD
• Reconnect the USB device/SD card
• Fully extend the antenna
• Adjust the position of antenna
• Separate the antenna from other cables or
appliances
• Turn off TV/DVD or other devices nearby
Owner's manual