MASCOT 3546 Mode D'emploi page 14

Test / Standard
Immunity:
Electrostatic discharge
(ESD),
IEC 61000-4-2
Electrostatic fast transient
/ burst,
IEC 61000-4-4
Surge, IEC 61000-4-5
Voltage dips, short
interruptions and voltage
variations on power
supply lines,
IEC 61000-4-11
Power frequency mag-
netic field
IEC 61000-4-8
Conducted RF,
IEC 61000-4-6
Radiated RF,
IEC 61000-4-3
These guidelines may not apply in all situations.
Electromagnetic propagation is affected by absorption and reflection from structures, objects and people and
field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land
mobile radios, amateur radio, AM and FM radio broadcasts and TV broadcasts cannot be predicted theoretically
with accuracy.
To assess the electromagnetic environment due to fixed RF transmitters an EM site survey may be considered.
If the measured field strength in the location exceeds the applicable RF compliance level above, the Mascot
product should be observed to verify normal operation. If abnormal performance is observed, additional mea-
sures may be necessary, such as re-orienting or relocating the product.
Compliance level
± 8 kV contact
± 15 kV air
± 2 kV for AC-power lines
± 1 kV for output lines
± 1 kV line to line
± 2 kV line to earth
(if applicable).
<5% U (0.5 cycle)
T
40% U (5 cycles)
T
70% U (25 cycles)
T
<5% U for 5 s
T
U = AC Input Voltage prior
T
to test.
3 A/m (50/60 Hz)
3 Vrms
150 kHz to 80 MHz
3V/m for Professional
healthcare environment.
10 V/m for Home Healthcare
environment.
80 MHz to 2.7 GHz
14
Guidance
Temporary loss of function may be expe-
rienced while the product is subject to the
phenomena.
The product is expected to recover to its nor-
mal operation.
Not applicable for non-magnetic field
sensitive devices.
Temporary loss of function may be expe-
rienced while the product is subject to the
phenomena.
The product is expected to recover to its nor-
mal operation.
EN