Configuration Software Wikasoft-Tt; Starting The Software - WIKA TR33 Mode D'emploi

8. Configuration software WIKAsoft-TT
8. Configuration software WIKAsoft-TT
For installation please follow the instructions of the installation routine.
8.1 Starting the software
Start the configuration software by double-clicking on the WIKAsoft-TT icon.
After starting the software, the
language can be changed, via
the selection of the appropriate
country's flag.
The selection of the COM port is
made automatically.
After the connection of a transmitter
(using the PU-548), on pressing the "Start" button, the configuration
interface is loaded.
The configuration interface can only be loaded when an
instrument is connected.
WIKA operating instructions model TR33
EN
25