Before Use; Refrigerator Use; Power On/Off Switch - Thermador KBULT3655E Guide D'utilisation Et D'entretien

Remove the Packaging
If the ice storage bin is located on the door, remove the
temporary shield from underneath the ice storage bin. See
"Ice Maker and Storage Bin."
Remove tape and glue residue from surfaces before turning
on the refrigerator. Rub a small amount of liquid dish soap
over the adhesive with your fingers. Wipe with warm water
and dry.
Do not use sharp instruments, rubbing alcohol, flammable
fluids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your refrigerator. For
more information, see "Refrigerator Safety."
Dispose of/recycle all packaging materials.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from refrigerator.
Failure to do so can result in death, explosion, or fire.
4

BEFORE USE

After you remove all of the packaging materials, clean the inside
of your refrigerator before using it. See the cleaning instructions
in "Refrigerator Care."

REFRIGERATOR USE

If you need to turn the power to your refrigerator On or Off, you
must remove the top grille to gain access to the On/Off switch.
Turn the power to the refrigerator Off when cleaning your
refrigerator or changing light bulbs.
Remove Top Grille:
1. Grasp both ends of the top grille.
2. Push the top grille straight up, then pull straight out. Lay the
Replace Top Grille:
1. Insert top grille hooks (located on the back of the top grille)
2. Pull grille down slightly to lock into place.
1. Remove top grille.
2. Press main power switch to the On or Off position.
3. Replace top grille.
Clean Before Using
Important information to know about glass shelves
and covers:
Do not clean glass shelves or covers with warm water when
they are cold. Shelves and covers may break if exposed to
sudden temperature changes or impact, such as bumping.
For your protection, tempered glass is designed to shatter
into many small, pebble-size pieces. This is normal. Glass
shelves and covers are heavy. Use special care when
removing them to avoid impact from dropping.
Powe r O n/ O ff S wi t c h
Remove and Replace Top Grille
top grille on a soft surface.
B
A. Top grille
B. Cabinet side trims
into the slots on the side trim.
Turn Power On or Off:
A B