Introduction - Gossen MetraWatt METRAFLEX 3000M Mode D'emploi

_______________________________________________________________
2.

INTRODUCTION

The METRAFLEX are AC current probes utilising Rogowski
principle. They can be used to measure AC current up to 3000A
by being connected to an appropriate measuring device
(multimeter, data logger, power analyser etc.). The flexible probe
allows current measurements on conductors that are hard to
reach.
The
(METRAFLEX 3000M) or 0...1.5V (METRAFLEX 3000MXL),
proportional to the current being measured with three selectable
ranges.
_______________________________________________________________
6
probes provide
3
1
2
Fig 1
1. Probe Coupling
2. Probe Output Cable
3. Flexible Current Probe
4. Power On / Range Switch
5. RED LED – Overload
6. ORANGE LED – Low Battery
7. External Power Supply Input
8. Integrator Housing
9. Output Cable
an AC output
2
7
9
voltage of 0...3V
4
5
6
8