Publicité
Les langues disponibles
Les langues disponibles
2-5. Software Installation
For optimal computer system protection, install UPS monitoring software to fully configure UPS shutdown.
Communication ports:
USB port
To allow for unattended UPS shutdown/start-up and status monitoring, connect one end of the communication cable
to the USB/RS-232 port and the other to the communication port of your PC. With the monitoring software installed,
you can schedule UPS shutdown/start-up and monitor UPS status on your PC.
The UPS is equipped with an intelligent slot, ideal for either an SNMP or AS400 card. When installing either an SNMP
or AS400 card in the UPS, it will provide advanced communication and monitoring options.
Note: A USB port and RS-232 port cannot work at the same time.
INFOSEC UPS SYSTEM – 4 rue de la Rigotière – 44700 Orvault – France – www.infosec-ups.com
53
Hot Line Tel : +33 (0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 04 14 AA 59 203 37
Wiring diagram of parallel system for 15KR(L)/20KR(L)
RS-232 port
Share current cable connection
Parallel communication port
connection
Intelligent slot
Publicité
Chapitres
Dépannage
