Standards; About Batteries - INFOSEC E6 LCD 10K TM RM Manuel Utilisateur

1-6. Standards

* Safety
IEC/EN 62040-1
* EMI
Conducted Emission.................................. :IEC/EN 62040-2
Radiated Emission .................................... :IEC/EN 62040-2
* EMS
ESD ........................................................ :IEC/EN 61000-4-2
RS .......................................................... :IEC/EN 61000-4-3
EFT ......................................................... :IEC/EN 61000-4-4
SURGE .................................................... :IEC/EN 61000-4-5
CS .......................................................... :IEC/EN 61000-4-6
Power-frequency Magnetic field ................. :IEC/EN 61000-4-8
Low Frequency Signals .............................. :IEC/EN 61000-2-2
Warning: This product is for commercial and industrial applications in accordance with second
environment-installation requirements otherwise additional measures may be needed to prevent
disturbances.

1-7. About batteries

It is recommended that a qualified technician change the battery.

Do not dispose of the battery in a fire as it may explode.

Do not open or damage the battery! The electrolyte, fundamentally sulphuric acid, can be toxic and

harmful to the skin and eyes. If you come into contact with it, wash thoroughly with water and clean dirtied
clothes.
Do not throw the battery into a fire. It may explode. It has to be disposed of separately at the end of its

useful life. Refer to local legislation and regulations.
The UPS contains large-capacity batteries. To avoid any danger of electric shock do not open it/them. If a

battery needs servicing or has to be replaced, please contact the distributor.
Servicing should be performed or supervised by competent personnel who take the necessary precautions.

Keep unauthorized personnel away from batteries.
A battery can present a risk of electric shock and cause short circuits. The following precautions should be

observed by the qualified technician:
 Remove watches, rings or other metal objects from hands.
 Use tools with insulated handles.
 Disconnect the charging source prior to connecting or disconnecting battery terminals.
 When replacing batteries, use the same type and number of sealed lead-acid batteries.
INFOSEC UPS SYSTEM – 4 rue de la Rigotière – 44700 Orvault – France – www.infosec-ups.com
45
Hot Line Tel : +33 (0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 04 14 AA 59 203 37
Category C3
Category C3
Level 4
Level 3
Level 4
Level 4
Level 3
Level 4