Sanyo CE42LM5WP Manuel D'utilisation page 7

GB
Controls and Menus
1. The LCD display has a Standby light to show there is power.
Switching into/from standby mode
The Standby mode is used for switching the LCD monitor off for
short periods of time. In standby mode the monitor is switched
off but is still receiving mains power.
● To turn the monitor into standby mode, press the
The blue power indicator illuminates more brightly.
● To turn the monitor ON from standby mode, press any of the
4 5, 6
following buttons: ,
If you find the power indicator flashing, disconnect
power cord from the power outlet and contact our
Service desk.
This warning is a sign to let you know that the power
protection function of this TV set is now operating.
Control buttons (bottom corner of back cover)
2.
Menu/F button:
rotate between volume, Brightness, contrast,
colour, sharpness and OSD language.
Input/ OK button: s
witch between AV1, RGB, AV2, AV3, DVI
and PC mode.
e d
buttons:
provide up and down adjustments.
4 button:
To switch to standby mode (to switch off completely
disconnect the monitor from the power supply).
INST
INST
1
2
4
button.
or 0-9 buttons.
ALLA TION
ALLA TION
Many of your monitors functions are controlled through the menu
function, using the remote control handset.
Brightness
Contrast
Color
Sharpness
Preset
Noise Reduction
Dyn. Skin
Text Brightness
Sound
Volume
Balance
Bass
Treble
Preset
Surround
OSD Language
Timer
Text Language
AV2 setting
During menu operation the bottom of the on screen display will show
which controls can be used for menu navigation.
Press the MENU button to enter the main menu.
A sub menu is selected using the 5 or 6 button and pressing
the1 button when the required sub menu is highlighted.
When you have finished you can press the MENU button to exit,
then the MENU button again to exit the main menu.
Main Menu
Picture
Sound
Setting
: Select
Picture
Brightness
Contrast
Color
Sharpness
Preset
Noise Reduction
Dyn. skin tone
Text Brightness
: Select
1. Press the MENU button. Select Picture using the 5 or 6
button. Press the1button to enter.
Set the picture settings for your "personal" preference.
2. Use the 5 or 6 button to select eg. Brightness and the 1
or2 button to adjust levels.
3. Preset : You can select either your "Personal" settings, or
Dynamic, Standard or Eco settings.
4. Noise Reduction: May be used to reduce any local picture 'noise'
(granular appearance) being experienced by using 1or2button
to select between Mid / Max / Auto / OFF /Min.
5. Dynamic skin tone: May be used to enhance skin tone by using
1or 2 button to select between On / Off.
Tint : is only available if NTSC equipment is connected.
6. Text Brightness: May be adjusted by using 1or2 button to
select between Min / Mid / Max.
Press the MENU button to return to Main Menu. These settings
automatically store when you exit the menu.
Menu Operation
Personal / Dynamic / Standard / Eco
Min/ Mid / Max / Auto / OFF
Tone ON / OFF
Min/ Mid / Max
Personal /Talk/ Music/ Normal
Mid / Max / OFF
Off Timer OFF/ 5-120 mins
Greek/ West / East/ Cyrillic
RGB, H/V / Y Pb Pr
: Adjust
MENU
Picture menu
Personal / Dynamic / Standard / ECO
Mid /Max / Auto / Min / OFF
ON / OFF
Min / Mid / Max
: Adjust
MENU
GB
: Exit
: Back
7