Grounding Instructions And Electrical Safety - Krushr F86/024 Guide De L'utilisateur

Grounding Instructions and Electrical Safety

Grounding Instructions
This appliance must be grounded to a metal permanent wiring system, or, an
equipment grounding conductor must be run with the circuit conductors and
connected to the equipment grounding terminal or lead on the appliance. See
the installation instructions for information on electrical requirements or seek
the advice of a qualified electrician.
Electric shock could result if the electrical supply for the appliance covered in
this User Guide is incorrectly installed or if the appliance has been improperly
grounded. Do not use the appliance if you are not certain the electrical supply
has been correctly installed or the appliance has been properly grounded.
The appliance is equipped with a three-conductor cord and three-prong
ground type plug to fit the proper grounding type receptacle. The green – or
green and yellow – colored conductor in the cord is the grounding wire. Never
connect the green – or green and yellow – wire to a live terminal.
IMPORTANT: If the supply cord is damaged, the cord must be replaced by the
manufacturer, its service agent or similarly qualified person in order to avoid a
hazard.
WARNING – READ THESE INSTRUCTIONS THOROUGHLY BEFORE CONNECTING
THIS PRODUCT TO THE MAINS SUPPLY
Electrical Safety
Before switching on make sure that the voltage of your electricity supply is the
same as that indicated on the rating place. This appliance is for use on a nominal
120 volt circuit. It has a plug as shown in sketch A in Figure 1. The adapter shown
7
US/Can