How To Fit A Krushr Bag - Krushr F86/024 Guide De L'utilisateur

How to fit a Krushr Bag

Careful compliance with these instructions is necessary to avoid the bag
snagging on and becoming trapped in the crushing mechanism. Many of our
customers find it convenient to spend a few moments to insert a bin liner into
the Main Collection Bin. This helps with removal of the waste when the bin is full
and also keeps the bin clean. Our bags are strong enough to withstand tearing
during compaction of the waste and are custom made for each model ensuring a
snug fit inside the bin. Use of a non-Krüshr bag is not recommended. The forces
of compaction may tear a weaker bag. Furthermore, an oversized or undersized
bag will make it more likely that the bag will become trapped in the crushing
mechanism potentially requiring a service engineer visit. Please note that where
a non-Krüshr bag is used which gets trapped inside the compaction mechanism,
any resulting call out or damage to your appliance is not covered under your
warranty.
1. Remove the bin from the supporting cage noting how the top rim of the
bin rests on the rollers at the top of the cage.
2. Unfold a bag noting how the bag is shaped to fit the bin.
3. Lower the bag into the bin folding between
6" – 8" over the top of the bin. This will ensure that
the bag does not fall into the bin during operation
and leave enough excess at the top to secure fitment
around the rim of the bin. It is important that the bag
inside the bin is not too tight so as to allow for
compaction of the waste without tearing the bag.
17
US/Can