Krushr F86/024 Guide De L'utilisateur page 13

open the door whilst compaction of the Main Collection Bin is in operation. For
your safety, should you open the door during this operation, this will halt the
procedure and a fast bleeping alarm will sound. Immediately close the door to
stop the alarm and allow the appliance to reset itself.
WARNING - DO NOT exceed the duty cycle of this appliance referred to in Initial
Set Up.
3. HYPERCRUSH MODE. This appliance is fitted with an enhanced
compaction facility called "hypercrush". This feature is designed to overcome
the memory effect in many recyclable materials which gives them a tendency to
gain their original shape following initial compaction. Using the hypercrush
mode at regular intervals will allow you to make maximum use of the capacity of
the main bin.
4. TO USE THE HYPERCRUSH
MODE press and hold the blue button
for three seconds before releasing.
The blue button will start flashing.
Close the main door. The bin contents
will be crushed and the crushing
mechanism will remain in the
downward position. This operation
delays withdrawal of the compaction
plate from the Main Collection Bin
leaving the compacted material at
maximum compaction for one hour.
After this time the appliance
automatically resets itself for further
use
5. To disengage the hypercrush mode at any time simply pull the main door
open by 1cm. It will not open further whilst the compaction plate sits in the Main
13
US/Can