How To Use The Can Crush Drawer - Krushr F86/024 Guide De L'utilisateur

How to use the Can Crush Drawer

Suitable for use with food and drink
cans or tins. Ensure cans and tins
are empty and have lids or pull
rings removed before loading. It is
best practice to rinse these items
before loading to prevent stickiness
or odour within the appliance
WARNING
DO NOT crush aerosol cans or similar pressurised containers in this appliance.
The Can Crush Drawer is for the compaction of cans and tins only. Certain metal
items such as foil and foil trays must not be compacted in the Can Crush Drawer
but placed directly and without any compaction into the Can Collection Drawer.
To avoid damage to the crushing mechanism only one item should be crushed
per cycle. Do not overload.
1. Pull open the drawer and place the metal can or tin inside the drawer on
its side with the open end towards you.
2. Close the drawer fully. You will hear the can or tin being crushed before it
drops into the Can Collection Drawer located beneath. NOTE: the Can Collection
Drawer must be fully closed in order for the Can Crush Drawer to function.
Please note: Opening the Can Crush Drawer during compaction will halt the
operation and the appliance will start bleeping. Closing the Can Crush Drawer
will stop the bleeping and reset the appliance. To restart compaction of the can
or tin reopen and close the Can Crush Drawer.
15
US/Can