Hitachi UC 24YF Mode D'emploi page 5

English
SPECIFICATION
CHARGER
Model
Charging time
Charging voltage
Weight
APPLICATION
For charging the HITACHI BATTERY
EB7, EB7S, EB7G
EB9, EB9S, EB9G, EB9B, EB9M, EB924, EB9H, EB930H
EB12, EB12S, EB12G, EB12B, EB12M, EB1224, EB12H,
EB1230H
EB14S, EB14B, EB1424, EB14H, EB1430H
EB18B, EB1830H
EB24B, EB2430H
CHARGING
Before using the power tool, charge the battery as
follows.
1. Connect the charger's power cord to the receptacle.
When connecting the plug of the charger to a
receptacle, the pilot lamp will blink in red. (At 1-
second intervals).
2. Insert the battery into the charger.
Firmly insert the battery into the charger till it
contacts the bottom of the charger and checking
the polarities as shown in Fig. 1.
Table 1
Before
charging
While
The pilot
charging
lamp lights
or blinks in
Charging
red.
complete
Charging
impossible
The pilot Charging
lamp lights impossible
in green.
4
Indications of the pilot lamp
Blinks Lights for 0.5 seconds. Does not light
for 0.5 seconds. (off for 0.5 seconds)
Lights Lights continuously
Blinks Lights for 0.5 seconds. Does not light
for 0.5 seconds. (off for 0.5 seconds)
Flickers Lights for 0.1 seconds. Does not light
for 0.1 seconds. (off for 0.1 seconds)
Lights Lights continuously
UC24YF
Approx. 40 – 90 minutes
7.2 – 24 V
1.0 kg
CAUTION:
If the batteries are inserted in the reverse direction,
not only recharging will become impossible, but it
may also cause problems in the charger such as
a deformed recharging terminal.
3. Charging
When inserting a battery in the charger, the pilot
lamp will light up continuously in red.
When the battery becomes fully recharged, the pilot
lamp will blink in red. (At 1-second intervals.) (See
Table 1)
(1) Pilot lamp indication
The indications of the pilot lamp will be as shown
in Table 1, according to the condition of the charger
or the rechargeable battery.
Malfunction in the
battery or the charger
The battery tempera-
ture is high, making
recharging impossible.