Replace Plastic Spacers - Jenn-Air JJW2427DB Instructions D'installation

5. In the same manner, install a front foot on the right front of
the oven.
6. Using two or more people, place the oven in its upright
position.
7. Go to the "Make Electrical Connection" section in the
Installation Instructions provided with your built-in oven.

Replace Plastic Spacers

Replace Plastic Spacers on Single Ovens
1. Remove the 2 screws, 1 in each spacer, attaching the 2
plastic spacers (A) to the right side of the oven.
2. Using the 2 screws removed, install 2 new plastic spacers (B)
provided with this kit.
B
A
A. Plastic spacer
B. New plastic spacer
3. In the same manner, remove and replace the 2 plastic
spacers on the left side of the oven..
B. New plastic spacer
8
06-May-2019 13:38:41 EDT | RELEASED
Replace Plastic Spacers on Double Ovens
1. Remove the 3 screws, 1 in each spacer, attaching the
3 plastic spacers (A) to the right side of the oven.
2. Using the 3 screws removed, install 3 new plastic spacers (B)
provided with this kit.
3. In the same manner, remove and replace the 3 plastic
spacers on the left side of the oven.
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
A
B
A
B
A
B
A. Plastic spacer
B. New plastic spacer