Radio Reception; Searching For The Stations Automatically; Automatic Tuning; If Fm Stereo Reception Is Poor - Monaural Mode - Sony XR-6600RDS Mode D'emploi

Radio Reception

Searching for the Stations
Automatically

— Automatic Tuning

1
Select the desired band.
TUNER
FM1 n FM2 n FM3 n
MW n LW n FM1 n ···
2
Press either side of the SEEK/AMS
button to search for the station
(automatic tuning).
SEEK
AMS
For lower
frequencies
The scanning stops when a station is received.
Press either side of the button repeatedly until
the desired station is received.
When an FM stereo program with a sufficient
signal strength is tuned in,
ST
1 0 4 3 0
the "ST" indication will appear.
To avoid the automatic tuning from stopping on
stations too frequently (local seek mode), press
the button momentarily to get the "LCL"
SENS
indication.
Only the stations with relatively strong signals can be
tuned in. The local seek mode functions only when the
automatic tuning is in operation.
Changing the Displayed Items
DSPL
Each time you press the
D
displayed items alternate the between
frequency and time.
If FM Stereo Reception is
Poor
— Monaural Mode
SENS
Press the button momentarily.
n "MONO" appears on the display.
The sound will improve, but it will become
monaural.
Actual total number:
Tuning in by Adjusting the
Frequency
1
2
PREVENTING ACCIDENTS!
SEEK When tuning in during driving, use the
AMS
automatic tuning and the memory preset
search function (page 8) instead of the manual
For higher
tuning.
frequencies
Memorizing Stations
Automatically

— BTM (Best Tuning Memory) Function

This function selects from the currently
received band the stations with the strongest
signals and memorizes them in order of their
frequency.
1
2
button, the
For example, when you select FM2 and preset
number 3 is displayed,
the operation will start from preset number 3 on FM2, and
will stop at preset number 6 on FM3.
Sony XR-6600RDS (

— Manual Tuning

Select the desired band.
TUNER
Press and hold either side of the SEEK/
AMS button.
Release the button when the desired station
is received.
SEEK
AMS
For lower
frequencies
Select the desired band.
TUNER
BTM
Press the button for more than two
B
seconds.
• When there is no preset number indicated
on the display window, stations will be
stored on all preset number buttons on the
currently selected band.
• When there is a preset number indicated
on the display window, the unit will store
stations on all preset number buttons
from the one currently displayed.
E
,F,G,I) 3-856-008-11 (1)
SEEK
AMS
For higher
frequencies
EN
7