Télécharger Imprimer la page

SEVERIN GS 8862 Mode D'emploi page 18

Masquer les pouces Voir aussi pour GS 8862:

Publicité

Les langues disponibles

Les langues disponibles

Ventilation
The air warmed behind the appliance needs to
circulate freely. For this reason, the circulation of air
cannot be compromised.
Caution! Do not cover possible existing ventilation
openings in the back area of the top cover plate!
Connection
• Before you connect the appliance, you have to
make sure that itself and the power plug do not
show any transport damages.
• Connect the appliance only to a shockproof out-
let. The mains voltage has to correspond to the
one stated on the tool identification plate.
• The appliance complies with the guidelines that
are obligatory for CE marking.
• Do not connect the appliance to an inverter
• The power plug should not touch the backside,
in order to avoid possible vibration noise.
• The appliance can be put into operation by plug-
ging the mains plug into the point.
• A complete switching-off only occurs by pulling
the mains plug.
• If the appliance has been disconnected from the
mains, wait approx. 5 minutes after plugging in
the mains plug before setting the temperature
controller to the desired position.
GS_8862_multi.indd 18
Operating elements
The temperature adjustment is set via the controller
inside the appliance.
Place it in a central position (2 - 3) to set an opti-
mal temperature for normal use. The more you turn
the knob clockwise (3 - 4) with the help of a token/
coin, the lower the temperature in the appliance
will be. The more you turn the knob counterclock-
wise (1 - 2), the higher the temperature in the ap-
pliance will be. Make sure the desired temperature
has been reached by using a thermometer. The "O"
position means the device is switched off.
Freezer Door
The freezer door should always stay closed so that
the food does not defrost. Thereby, the formation of
ice and frost accretion is reduced. Therefore, make
sure that the door is only open for withdrawal of
food or rather for filling the freezer.
Freezing/Storing of Food
• The appliance is designed for the freezing of
food, for the long-term storage of frozen food as
well as for the appliance ion of ice cubes.
• Fresh food should be frozen to the core as quick-
ly as possible, so that the nutritional value, the
vitamins, etc. do not get lost. For this reason, put
the food in one or two rows in the freezer.
• Do not bring them into contact with already
frozen food.
• Do not exceed the freezing capacity per day!
The respective value for the maximum freezing
capacity can be taken from the appliance specifi-
cation sheet at the end of the manual.
• The freezing time shortens if the food to be
frozen is divided into small portions.
• Store the frozen food in the appliance only pack-
aged. You can use uncoloured plastic sheets/
bags or aluminium foil as packaging material.
Remove the air from the packaging before
freezing and check for airtightness. Provide every
packaging with a label with the content, date of
freezing and date of expiry on it.
• Do not freeze carbonated liquids, warm foods or
liquids in a glass container or bottle.
• Defrost frozen appliances in a refrigerator. Foods
keep their taste when they are defrosted slowly,
and the emitted cooling energy from these
appliances can be used to maintain the intended
temperature in the refrigerator.
- 18 -
10.12.2018 11:45:24

Publicité

loading