Dual Rates; End Point Adjustment - XciteRC XRC 6Si Mode D'emploi

Dual rates

DE
This function allows one or more controls to have less (or more) control authority at the flick of a switch. With
the dual rate selected, the servo deflection will appear to have been reduced in a manner similar to reducing
the servo's end points.
To toggle the dual rates menu and make adjustments, click the UP and DOWN buttons simultaneously to
enter the functions menu, click UP or Down to scroll to the „D/R"option and press SELECT to enter the dual
rates menu. Press SELECT again to select the desired channel and output by clicking UP or DOWN. After
the selection is finalized, press SELECT to exit to the channel selection, and simultaneously click the UP and
DOWN buttons to exit to the main menu.

End point adjustment

End point adjustment or EPA, limits the amount of travel on the servo, or esc. For example, an EPA limit of
50% means that only 50% of the servo/throttle throw is utilized even if the user in put is 100% of the travel
on their transmitter.
To toggle the EPA function, click the UP and DOWN keys simultaneously to enter the system menu, then
click UP or DOWN to scroll to the EPA option; press SELECT to enter the EPA menu, press SELECT again
to select the desired channel and to change its EPA settings by clicking UP or DOWN; after the selection is
finalized, press SELECT to exit to the channel selection, and simultaneously click the UP and DOWN buttons
to exit to the main menu.
32
Function menu
Channel select Value
Channel select End point
50501000 Sender XRC 6Si