Channel Reverse; Dual Rates - XciteRC XRC 4si Mode D'emploi

Channel reverse

EN
This function is used when the channel output opposites the desired output.
To toggle the channel reversal function, click the UP and DOWN keys simultaneously enter the system menu,
then click UP or DOWN to scroll to the REV option: press SELECT to enter the REV menu, press SELECT
again to select the desired channel and to change its reversal settings by clicking UP or DOWN after the
selection is finalized, press ·SELECT to exit to the channel selection, and simultaneously click the UP and
Down buttons to exit to the main menu.

Dual rates

This function allows one or more controls to have less (or more) control authority at the flick of a switch. With
the dual rate selected, the servo deflection will appear to have been reduced in a manner similar to reducing
the servo's end points.
To toggle the dual rates menu and make adjustments, click the UP and DOWN buttons simultaneously to
enter the functions menu, click UP or Down to scroll to the „D/R"option and press SELECT to enter the dual
rates menu. Press SELECT again to select the desired channel and output by clicking UP or DOWN. After
the selection is finalized, press SELECT to exit to the channel selection, and simultaneously click the UP and
DOWN buttons to exit to the main menu.
26
Function menu
Channel select Reverse
Channel select Value
50300000 Sender XRC 4si