Canon FAX-L170 Guide De Démarrage page 81

Power Supply
WARNING
▪ Do not damage or modify the power cord. Also, do not place heavy objects on the power cord or pull on or
excessively bend it. This can cause electrical damage, resulting in fi re or electrical shock.
▪ Keep the power cord away from all heat sources. Failure to do so can cause the power cord insulation to
melt, resulting in a fi re or electrical shock.
▪ The power cord should not be taut, as this may lead to a loose connection and cause overheating, which
could result in a fi re.
▪ The power cord may become damaged if it is stepped on, fi xed with staples, or if heavy objects are placed
on it.
▪ Continued use of a damaged power cord can lead to an accident, such as a fi re or electrical shock.
▪ Do not plug or unplug the power plug with wet hands, as this can result in electrical shock.
▪ Do not plug the power cord into a multiplug power strip, as this can result in a fi re or electrical shock.
▪ Do not bundle up or tie up the power cord in a knot, as this can result in a fi re or electrical shock.
▪ Insert the power plug completely into the AC power outlet. Failure to do so can result in a fi re or electrical
shock.
▪ If excessive stress is applied to the connection part of the power cord, it may damage the power cord or the
wires inside the machine may disconnect. This could result in a fi re. Avoid the following situations:
- Connecting and disconnecting the power cord frequently.
- Tripping over the power cord.
- The power cord is bent near the connection part, and continuous stress is being applied to the power
outlet or the connection part.
- Applying a shock to the power connector.
▪ Do not use power cords other than the one provided, as this can result in a fi re or electrical shock.
▪ As a general rule, do not use extension cords. Using an extension cord may result in a fi re or electrical
shock.
▪ Remove the power plug from the AC power outlet and refrain from using the machine during a thunder
storm. Lightning can result in a fi re, electrical shock or malfunction.
CAUTION
▪ Do not use a power supply voltage other than that listed herein, as this may result in a fi re or electrical
shock.
▪ Always grasp the power plug when unplugging the power plug. Do not pull on the power cord, as this may
expose the core wire of the power cord or damage the cord insulation, causing electricity to leak, resulting in
a fi re or electrical shock.
▪ Leave suffi cient space around the power plug so that it can be unplugged easily. If objects are placed
around the power plug, you may be unable to unplug it in an emergency.
Handling
WARNING
▪ Do not disassemble or modify the machine. There are high-temperature and high-voltage components inside
the machine which may result in a fi re or electrical shock.
▪ Electrical equipment can be hazardous if not used properly. Do not allow children to touch the power cord,
cables, internal gears, or electrical parts.
▪ If the machine makes an unusual noise or emits smoke, heat, or an unusual smell, immediately turn off the
power switches of the machine and computer and disconnect the interface cable if it is connected. Then,
unplug the power plug from the AC power outlet and contact your local authorized Canon dealer. Continued
use can result in a fi re or electrical shock.
▪ Do not use fl ammable sprays near the machine. If fl ammable substances come into contact with electrical
parts inside the machine, this may result in a fi re or electrical shock.
▪ Always turn off the power switches of the machine and computer, and then unplug the power plug and
interface cables before moving the machine. Failure to do so can damage the cables or cords, resulting in a
fi re or electrical shock.
▪ Confi rm that the power plug or power connector is inserted completely after moving the machine. Failure to
do so can result in an overheating and fi re.
▪ Do not drop paper clips, staples, or other metal objects inside the machine. Also, do not spill water, liquids,
or other fl ammable substances (alcohol, benzene, paint thinner, etc.) inside the machine. If these items
come into contact with a high-voltage area inside the machine, this may result in a fi re or electrical shock.
If these items are dropped or spilled inside the machine, immediately turn off the power switches of the
machine and computer and disconnect the interface cable if it is connected. Then, unplug the power plug
from the AC power outlet and contact your local authorized Canon dealer.
▪ When plugging or unplugging a USB cable when the power plug is plugged into an AC power outlet, do not
touch the metal part of the connector, as this can result in electrical shock.
CAUTION
▪ Do not place heavy objects on the machine. The object or the machine may fall, resulting in personal injury.
▪ Turn off the power switch when the machine will not be used for a long period of time, such as overnight.
Turn off the machine and unplug the power plug if the machine will not be used for an extended period of
time, such as for several days.
▪ Open or close covers and install or remove cassette gently and carefully. Be careful not to hurt your fi ngers.
▪ Keep your hands and clothing away from the roller in the output area. Even if the machine is not printing, the
roller may suddenly rotate and catch your hands or clothing, resulting in personal injury.
▪ The output slot is hot during and immediately after printing. Do not touch the area surrounding the output
slot, as this may result in burns.
▪ Printed paper may be hot immediately after being output. Be careful when removing the paper and aligning
the removed paper, especially after continuous printing. Failure to do so may result in burns.
▪ Close the feeder or the platen glass cover gently so as not to catch your hand. This may result in personal
injury.
▪ The laser beam can be harmful to the human body. The laser beam is confi ned in the laser scanner unit
by a cover, so there is no danger of the laser beam escaping during normal machine operation. Read the
following remarks and instructions for safety.
- Never open covers other than those indicated in this manual.
- Do not remove the caution label attached to the cover of the laser scanner unit.
- If the laser beam should escape and enter your eyes, exposure may cause damage to your eyes.
▪ This machine is confi rmed as the class 1 laser product in IEC60825-1:2007.
Laser Diode Information
- wavelength: 780-800 nm
- maximum power: 10 mW
3
English