Nicols X-RAY 5 NEO Manuel D'utilisation page 23

adjust the pattern size, change sonic rhythm under audio, ...）
3).ENTER: Confirmation key
State of mode and operation:
1). Rrg Mode: playlist mode, play PRG file, the second row of LCD shows current playlist name, press "UP" and
"DOWN" to change the playlist, press "ENTER" to change current folder.
2). ILDA Mode: ILDA play mode, play single ILDA file (extension name is .ILD, case insensitive) repeatedly. The
second row of LCD shows the current playing ILDA file name. Press "UP" and "DOWN" to change ILDA file;
press "ENTER" to change current folder.
3). Audio Mode: play built-in sonic programs, press "UP" and "DOWN" to change sonic rhythm.
4). Auto Mode: play built-in auto programs.
5). Dmx Mode: the first row of LCD shows the current mode, the second row shows and DMX address and
receiving status of console.
6). Phase Set: can set phase / direction of X and Y separately.
Attention
1. The system just support short file name, file name (include folder name), most 8-bit file name and 3
extension name, file name and extension name formed by letter, number and under line. File name can't over 8
and no Chinese words, otherwise the system can't identify it.
2. SD card can't mix other file, most support 20 folders, every folder can save maximum 255 files and 10 PRG
files.
3. Program table: user can use notepad to edit program list, the extension name is .PRG. Program table formed
by play file name, play speed, play times, ishow identify code "i"(if use ishow software make ild file), middle
using"i"separate. Edit item, for example: one program formed by File1.ild, File2.ild, File3.ild. File1.ild play
speed is 30K, replay
software; file3.ild play speed is 30K, play 4 times. Then prg1.prg contents as below:
When create one folder, need create the same PRG file under the folder, and put all the files need to play in the
folder into the PRG file. For example, under aurora folder, create aurora.prg file.After adding ILDA file, need
add the file to prg file, so that we can find the file quickly and play the file as per the speed you set.
3 times; file2.ild play speed is 35K, play one time, , and file 2 is made by ishow
File1.ild,12,3,0
File2.ild,20,1,1,i
File3.ild,18,4,2