Télécharger Imprimer la page

Domo DO362A Mode D'emploi page 54

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 17
Remote LED Screen Indicators
ARROW BUTTONS
These buttons must be used for setting the temperature. If you hold the button down for 3 seconds, you
can switch between Celsius '°C' and Fahrenheit '°F'.
MODE
MODE BUTTON
When pressing this button you can select the different functions : cool – fan – dry – auto. Attention: you
will also see a heat mode on the remote control. The unit is not equipped with a heat function. If you
select this function, the unit will not work.
MODE display
AUTO mode
Displays the current
Make sure the unit is plugged in.
mode, including:
Press the "mode"-button and select the "auto" mode.
AUTO
Press the arrow buttons to set the temperature.
COOL
Press the "on/off" button to turn the air conditioning on;
DRY
NOTE : when selecting the "auto" function, the air conditioning will determine in which setting it will
HEAT
work (cool – fan – dry), depending on the room temperature.
FAN
COOL mode
Make sure the unit is plugged in.
Press the "mode" button and select desired function.
Press the arrow buttons to select the desired temperature.
Press the "fan" button to select the fan speed.
Press the "on/off" button to turn on the air conditioning.
DRY mode
Make sure the unit is plugged in.
Press the "mode"button to select the "dry" function.
Use the arrow buttons to set the desired temperature.
Press the "on/off" button to turn on the air conditioning.
FAN mode
Make sure the unit is plugged in.
Press the "mode" button and select desired function.
Press the "fan speed" button to select the fan speed.
Press the "on/off" button to turn on the air conditioning.
NOTE : when using the "fan" mode, no temperature will be displayed. The room temperature can't be
controlled.
FAN SPEED display
FAN
FAN BUTTON
Displays selected FAN SPEED:
When pressing this button you can select the desired fan speed: auto, low
HIGH,
.
or
LOW
This display is blank when
SHORT
SHORTCUT
set to AUTO speed.
CUT
With this button you can set and switch on a preferential setting.
If you use a certain setting more often, you can set this by pressing the SHORTCUT button for three
seconds. The apparatus then remembers the settings that are switched on at the moment of pressing.
54
DO362A
Transmission Indicator
Lights up when remote sends
signal to unit
ON/OFF display
Appears when the unit is turned on,
and disappears when it is turned off
MED,
Remote LED Screen Ind
TIMER ON display
Displays when TIMER
ON is set
FAN SPEED display
Displays selected FAN SPEED:
SILENT display
Not available for this unit
or
This display is blank when
set to AUTO speed.
Temperature/Timer display
Displays the set temperature by default, or timer settin
when using TIMER ON/OFF functions
Temperature range: 17-30 C(62 F-86 F)
Timer setting range: 0-24 hours
This display is blank when operating in FAN mode.
Remote LED Scree
Remote LED Scr
Transmission Indic
Lights up when remo
signal to unit
MODE display
MODE display
MODE display
Displays the current
Displays the current
Displays the current
mode, including:
mode, including:
mode, including:
AUTO
AUTO
AUTO
COOL
COOL
COOL
TIMER OFF display
DRY
DRY
DRY
Displays when TIMER
HEAT
HEAT
HEAT
OFF is set
FAN
FAN
FAN
FAN SPEED display
FAN SPEED display
Displays selected FAN SPEE
Displays selected FAN SP
HIGH,
HIGH,
LOW
or
or
LOW
LOW
, med
, high
This display is blank when
This display is blank when
set to AUTO speed.
set to AUTO speed.
o
O
Transmiss
Transm
Lights up w
Lights u
signal to un
signal to
ON/OFF dis
ON
Appears wh
App
and disappe
and
ECO disp
Not availa
this unit
Battery dis
Low batter
detection
SLEEP dis
Displays w
SLEEP fun
is activated
FOLLOW M
display
Indicates th
the FOLLO
function is
Not availab
this unit
HIGH,
MED,
ME
M
O

Publicité

loading