Domo DO362A Mode D'emploi page 53

drain outlet
rear
Press the "+" and "-" buttons to select the time. The max time selection is 24 hours.
After finishing the selection, the time will start to countdown on the display until "auto on" or "auto off",
depending on the selection you made.
You can cancel the timer function at any time by pressing the "on/off" touch.
When the error code E1 or E2 is displayed, the timer selection will be cancelled.
7. SWING touch
To adjust the air direction.
8. LED display
Will show het temperature and timer selections. When the "dry or "fan" mode is selected, the display will
show the room temperature.
REMOTE CONTROL
· The remote control will only function within 8 m of the air conditioning. Point the remote in the
direction of the air conditioning. The transmission will be confirmed with a beep
signal.
· The air conditioning will not react to the remote if the signal is blocked by curtains,
doors or other materials.
· Make sure the remote doesn't get wet. Don't expose the remote to direct sunlight
or heat.
· When the infrared sensor on the appliance is positioned in direct sunlight it is
possible that it won't react to the remote control. Make sure there is no direct
sunlight on the infrared sensor.
· When other electrical appliances are reacting to the remote control, remove them
further away from the air conditioning or contact your supplier.
· Don't use old and new batteries at the same time in the remote control. Don't use
two different types of batteries in the remote control.
· Remove the batteries from the remote, when you won't use it for a longer period of
time. (more than two months)
· Recycle used batteries correctly.
Batteries
· The remote control works with 2 AAA batteries.
· Remove the cover of the batterie compartment, by pressing down on it and sliding
it out of the remote.
ON/OFF
· Place the batteries, make sure to follow the indications + and – indicated in the
MODE
batterie compartment.
TEMP
FAN
· Place the cover back on the batterie compartment.
· NOTE : When removing the batteries all selections will be deleted. When placing
SLEEP SWING
new batteries you have to reinstall all the selections.
Functions
ON/OFF
ON/OFF BUTTON
To turn the unit on or off. The
ON/OFF SHORT
CUT
TIMER
MODE
ON
TEMP
www.domo-elektro.be TIMER
FAN
OFF
SLEEP
SWING LED
SHORT
CUT
TIMER
ON
TIMER
OFF
LED
symbol appears on the display
ON/OFF SHORT
CUT
TIMER
MODE
ON
TEMP
TIMER
FAN
OFF
SLEEP SWING LED
53
DO362A